gas Scroll Saw Blades

 

   

Click a blade category below to learn more about specific purpose blades.

Pégas Scroll Saw Blades

Pegas Super Skip Tooth

Pegas Skip Tooth

Pinned Blades

Modified Geometry

Pegas Reverse Skip
Tooth

 

Home Contrary to the other scroll saw blade manufacturers, our blades are not milled but stamped. This process allows us to control very precisely the set of each teeth, to the left and to the right, 100% symetric. The consequence is that our teeth are sharper, the blade turns much faster and tighter, and if you want to saw straight on a line there is no need to move the work piece in an angle to compensate the bur left on one side of the blade because of the milling process.

(unless otherwise indicated, blades have plain ends and are 5" long).
Pégas Scroll Saw Blade Selection Chart

Pégas Super Skip Tooth Blades
 These blades are a good all around versatile application blade. The range of sizes and teeth per inch allows the cutting of intricate patterns as well as thick wood cutting. Super Skip blades perform well with wood, plastic, bone, Corian®, and hard woods. The blades provide good chip removal, and will give a smooth finish without burning, and no over heating of plastics.

Click Here For The Super Skip Tooth Intro Pack
or to Buy by the Dozen

Pégas Skip Tooth Blades
 A good all around versatile application blade.
The range of sizes and teeth per inch allows the cutting of intricate patterns as well as rough-cut work. Skip blades perform well with wood, plastic, bone, Corian and most fibrous materials. The blades provide good chip removal, and will give a smooth finish.

Click Here For The Skip Tooth Intro Pack
or To Buy by the Dozen

Pégas Pinned Blades
 Pinned blades are used in various types of coping saws and general purpose hand saws. Pinned scroll saw blades are typically made from heavier gauge steel than plain ended blades, giving greater durability and  life at the cost of a less refined cut. Can be used for cutting softwood, hardwood and soft metals.


Click Here For The Pinned Intro Pack
or to Buy by the Dozen
NEWPégas Modified Geometry
 Modified Geometry Teeth  probably the best blade on the market. The specific tooth design makes this blade EXTREMELY EFFICIENT; tolerates aggressive feed rates, avoids overheating, leaves a smooth finish, no splinters




Click Here For The Modified Geometry Intro Pack
or to Buy by the Dozen

 

Pegas Reverse Skip Tooth
An all around versatile  blades.
The same geometry as skip tooth blades, with the addition of reverse teeth. The reverse teeth help to prevent splinters from developing on the underside of the wood.


Click Here For The Reversed Skip Tooth Intro Pack or to buy by the Dozen

 

Trace Your Patterns to ANY Surface with 32Sq ft of Graphite Transfer Paper!  
LP-6M  ONLY $9

USA orders ship for Flat rate of just $4.25 regardless of how many items you order.
On Average we ship orders within 1 to 2 business days.Expedited USA shipping is available.
Click Here for Canada and International rates

Thank you for visiting!
Orders are transmitted through Authorize.Net which offers safe transactions for your peace of mind.



  
- Scroll Saw Patterns
 
- Scroll Saw Books
 
- Woodworking Plans
 

100 Percent Satisfaction Guarantee

© All Rights Reserved.  Lesley's Patterns, Ltd is a Registered  ® Trademark.


Graphite Pattern Transfer Paper

100 Percent Satisfaction Guarantee